Combi
Weight
5700kgOutput
75hpCapacity
41cm/5,5tons
![560C-Kombi-submeny](https://malwaforest.com/wp-content/uploads/560C-Kombi-submeny-1.png)
Malwa 560C Kombi
Stand-operative, high performance harvester and forwarder in one. 2,8 liters CAT-engine that meets the demands according to Euro 5/Stage-V. Harvester head with up to 42cm cutting diameter. Uniquely good handling and mobility. Conversion between harvester and forwarder takes about 20 minutes!
- Width: 195 cm
- Height: 285 cm
- Length: 570 cm
- Ground clearance: 400 mm
Specifications
Stand-operative dual machine which simply and easily converts between harvester and forwarder without compromising productivity or performance. A unique solution with removable counterweights allows the Combi to perform as well as a traditional harvester.
Spacious storage compartment houses four 20-litre containers for extra diesel, for example, or stump treatment fluid. Plus extra chains, bar and special tools.
May be transported by means of hook-lift platform. Being able to move ’two machines at one go’ makes the Combi perfect both for thinning tasks and dealing with windblows.
2,8 liters CAT-engine that meets the demands according to Euro 5/Stage-V Harvester head with up to 42cm cutting diameter and 5.5 tonne load capacity as a forwarder.
Uniquely good handling and mobility – even on sensitive ground or moorland.
DIMENSIONS AND WEIGHT
Weight: | From 5 700 kg. | |
Length: | 6,3 m. | |
Width: | 1,95 m (500 mm wheels). | |
Height: | 2,85 m. | |
Ground clearance: | 400 mm. |
LOAD AREA (IN FORWARDER MODE)
Gross load: | 5 500 kg. | |
Bunk area: | 2 m2. Foldable load gate (for harvester mode). | |
Load bunks: | One fixed and two adjustable. |
CHASSIS
Folded frame in laser cut steel. | ||
Casted bogie with chain drive and wheel reductions. | ||
Articulated joint with slewing bearing. | ||
Hydraulic frame stabilization, automatically activated. | ||
Towing points, front and rear. | ||
Articulated steering: | Hydraulic with double-acting cylinders. | |
Steering angle: | ± 45 degrees. |
ENGINE
Type: |
|
||
Cylinder volume: | 2,8 l. | ||
Output: | 55 kW (75 hk) at 2 200 rpm. | ||
Torque: | 300 Nm at 1 600 rpm. | ||
Fuel Tank: | 74 l. |
WORK HYDRAULICS
Flow: | 148 l/min at 1 700 rpm. | |
Work pressure: | 195 bar. | |
Other: | Variable load sensing axial piston pump with torque limiter. | |
Crane valve with individual signal pressure limitation. | ||
Common return filter handling 360 l/min. | ||
Separate filters for hydrostat and work hydraulics. |
TRANSMISSION
Type: | Hydro-mechanical transmission from Bosch Rexroth separated from work hydraulics. | |
Speed: | 0–20 km/h. Four gear steps. | |
Other: | 2WD or 6WD. Differential lock, front and rear. |
ELECTRICAL SYSTEM
Voltage: | 12 V. | |
Battery: | 95 Ah. | |
Alternator: | 120 A. | |
IQAN System (CAN-bus based) for control of all functions in the machine supported by a user-friendly touch screen. The system allows for setting of crane functions, transmission control, diesel engine and other machine functions. System offers follow-up, troubleshooting, and alarms. Software updates are possible. |
CAB
Seat: | Ergonomically designed seat with pneumatic suspension. Individual adjustment of the seat cushion, back and lumbar support are provided. | |
Hand rests: | Adjustable for joysticks. | |
Heating/Ventilation: | Fully-automatic heating and cooling unit (ECC). | |
Safety glass: | P12 mm polycarbonate in all windows. | |
More: | Windscreen wipers and washers, front and rear. | |
Spacious cabin supported on rubber buffers. | ||
Heat and sound insulated. | ||
Safe entrance. |
BRAKES
Fully hydraulic multi disc brakes in oil bath. |
Transport and work brake. |
Negative park brake and catastrophe brake. |
Automatic park brake. |
CRANE
Type: | High quality crane, Cranab FC45. | |
Reach: | 6,1 m. | |
Gross lifting torque: | 45,6 kNm. | |
Gross slewing torque: | 13 kNm. |
HARVESTER HEAD
Standard: | Log Max 2000T, a light head specifically designed for thinning. | |
Max cut capacity: | 420 mm. | |
Weight: | 430 kg. | |
Feed force: | 14,6 kN | |
Options: | Stump treatment. | |
Full system diagnosis. | ||
Value bucking. | ||
GPS, maps. |
We reserve the right to change specification without further notice. October 2020.
Discover more
Latest generation engine
2.8-liter CAT engine built to meet EU Stage 5 requirements for reduced particulate matter and lower nitrogen oxide levels. Same power output as Malwa’s previous Cat engines – 55kW/75hp. Very high serviceability.
![560C-senaste-motorgenerationen 560C-senaste-motorgenerationen](https://malwaforest.com/wp-content/uploads/560C-senaste-motorgenerationen.jpg)
![560c-två-maskiner-i-en 560c-två-maskiner-i-en](https://malwaforest.com/wp-content/uploads/560c-två-maskiner-i-en-1.jpg)
Two machines in one
Without compromising either cutting capacity or load capacity. You change from harvester to forwarder in 20 minutes. The record stands at 9 minutes.
Hydrostatic transmission
Hydro-mechanical drive line in absolutely top class with Bosch Rexroth A4VG/A6Vm transmission provides operational reliability, high efficiency and unique driving properties off-road. The working hydraulics is load sensing and power regulated.
![drivlina drivlina](https://malwaforest.com/wp-content/uploads/drivlina-1.jpg)
![Förarmiljö-Malwa Förarmiljö-Malwa](https://malwaforest.com/wp-content/uploads/Förarmiljö-Malwa-1-1200x1000.jpg)
Sheltered and safe operating environment
Climate control system, ECC. Air suspension seat, electrically heated and damping in two directions, different adjustment functions, lumbar support, etc. Good all-round visibility with extra-low side windows for checking the terrain and wheels.
Control system – top of the line
Parker IQAN, a leading communications system for electronics in mobile machinery. Our CAN-bus solution has digital fuses, which provide major advantages. Continuous development of the software provides optimal and always updated user-friendliness.
![560H_styrsystem 560H_styrsystem](https://malwaforest.com/wp-content/uploads/560H_styrsystem-1.jpg)