Harvester
Weight
6200kgOutput
75hpCapacity
41cm
Malwa 560H Harvester
High-performance compact class harvester. Ideal for thinning and working in sensitive soil conditions. Powerful CAT engine (EU Stage 5). 41 cm cutting capacity with new Log Max 2000T.
- Ground clearence: 400 mm
- Width: 195 cm
- Height: 285 cm
- Length: 570 cm
Specifications
Built for contractors, with a powerful CAT engine that comfortably meets the new environmental requirements under EU Step V. Excellent cab and ergonomics. Big machine-class drive train and work hydraulics. Crane tilt and bogie lifter. The harvester model is fitted with the new Log Max 2000T harvester head, which has a cutting capacity of 41 cm. Perfect for stand-operative first and second thinning. Leaves few or no tracks in forests and fields.
DIMENSIONS AND WEIGHT
| Weight: | From 5 700 kg. | |
| Length: | 5.7 m. | |
| Width: | 1,95 m (500 mm wheels). | |
| Height: | 2,85 m. | |
| Ground clearance: | 400 mm. |
CHASSIS
| Folded frame in laser cut steel. | ||
| Sturdy bogie with chain drive, slewing bearings and wheel reductions. | ||
| Articulated joint with slewing bearing. | ||
| Hydraulic frame stabilization, automatically activated. | ||
| Towing points, front and rear. | ||
| Articulated steering: | Hydraulic with double-acting cylinders. | |
| Steering angle: | ± 45 degrees. | |
ENGINE
| Type: | Caterpillar C2.8, EU Stage V, U.S EPA Tier 4 Final. | |
| Cylinder volume: | 2,8 l. | |
| Output: | 55 kW (75 hk) at 2 200 rpm. | |
| Torque: | 300 Nm at 1 600 rpm. | |
| Fuel Tank: | 74 l. |
WORK HYDRAULICS
| Flow: | 148 l/min at 1 700 rpm. | |
| Work pressure: | 195 bar. | |
| Other: | Variable load sensing axial piston pump with torque limiter. | |
| Crane valve with individual signal pressure limitation. | ||
| Common return filter handling 360 l/min. | ||
| Separate filters for hydrostat and work hydraulics. |
TRANSMISSION
| Type: | Hydro-mechanical transmission from Bosch Rexroth separated from work hydraulics. | |
| Speed: | 0–20 km/h. Four gear steps. | |
| Other: | 2WD or 6WD. Differential lock, front and rear. |
ELECTRICAL SYSTEM
| Voltage: | 12 V. | |
| Battery: | 95 Ah. | |
| Alternator: | 120 A. | |
| IQAN System (CAN-bus based) for control of all functions in the machine supported by a user-friendly touch screen. The system allows for setting of crane functions, transmission control, diesel engine and other machine functions. System offers follow-up, troubleshooting, and alarms. Software updates are possible. | ||
CAB
| Seat: | Ergonomically designed seat with pneumatic suspension. Individual adjustment of the seat cushion, back and lumbar support are provided. | |
| Hand rests: | Adjustable for joysticks. | |
| Heating/Ventilation: | Fully-automatic heating and cooling unit (ECC). | |
| Safety glass: | P12 mm polycarbonate in all windows. | |
| More: | Windscreen wipers and washers, front and rear. | |
| Spacious cabin supported on rubber buffers. | ||
| Heat and sound insulated. | ||
| Safe entrance. |
BRAKES
| Fully hydraulic multi disc brakes in oil bath. |
| Transport and work brake. |
| Negative park brake and catastrophe brake. |
| Automatic park brake. |
CRANE
| Type: | MMowi p50. Reach 6,2 m. Indexator rotator. | |
| Reach: | 6,2 m. | |
| Gross lifting torque: | 37 kNm. | |
| Gross slewing torque: | 14 kNm. | |
| Crane tilt: | ± 20 degrees. |
HARVESTER HEAD
| Standard: | Log Max 2000T, a light head specifically designed for thinning. | |
| Max cut capacity: | 420 mm. | |
| Weight: | 430 kg. | |
| Feed force: | 14,6 kN | |
| Options: | Stump treatment. | |
| Full system diagnosis. | ||
| Value bucking. | ||
| GPS, maps. |
We reserve the right to change specification without further notice. October 2020.
Discover more
Latest generation engine
2.8-liter CAT engine built to meet EU Stage 5 requirements for reduced particulate matter and lower nitrogen oxide levels. Same power output as Malwa’s previous Cat engines – 55kW/75hp. Very high serviceability.
Increased productivity with Log Max 2000T
The new Log Max 2000T both feeds and cuts faster than its predecessor 928. Stronger delimbing knives.
Powerful crane
We are talking seriously strong. Crane with a completely new design, extremely strong struts and crane foot.
Hydrostatic transmission
Hydro-mechanical drive line in absolutely top class with Bosch Rexroth A4VG/A6Vm transmission provides operational reliability, high efficiency and unique driving properties off-road. The working hydraulics is load sensing and power regulated.
Control system – top of the line
Parker IQAN, a leading communications system for electronics in mobile machinery. Our CAN-bus solution has digital fuses, which provide major advantages. Continuous development of the software provides optimal and always updated user-friendliness.
Easily operated bogie lift
An important feature to increase accessibility and agility.
